Narrow Your Search
Profile 4mm to 4.99mm
Click to remove.
Remove all selected filters.
Distance between connector pin centrelines. For dual row products pitch defines distance between both pins and rows. Note 0.8 x 1.2mm (0.31” x .047”) is the exception to this rule.
Male headers with exposed pins and female sockets with insulated non-exposed contacts.
Termination method of soldering connector onto PCB.
Defines the orientation which a connector sits on the PCB. Vertical (straight) is 90° to the PCB, right angle (horizontal) is 180° to the PCB. Use the appropriate mating connector pairs for parallel, co-planar and right angle PCB mating configuration.
Number of Rows
Defines PCB connector number of rows. GCT offer single in line (SIL), dual in line (DIL), triple in line (three rows) and quad in line (four rows) options.
Products which achieve a greater space between PCB’s, normally used in parallel PCB stacking applications to achieve a desired height. Elevated headers normally have two insulators, while elevated sockets use an insulator block and modular insulator extenders.
Plastic locating pegs to hold the connector in place during solder process and may provide extra strength post soldering. Also known as plastic post.
The profile of connectors above the PCB. Vertical connectors denote the stacking profile in parallel PCB applications, right angle connectors denotes height above the PCB.
Standard board to board connector range is black, white insulators used for White Lite range for Solid State Lighting (SSL) applications.
Header Square Pin Size
Filters PCB headers only. Displays the size of the header square pin/post, as connector pitch reduces sq. post size reduces too, one reason for lower current carrying capability of smaller pitch PCB connectors. Note: Two options in 1.27mm (.050”) pitch. Female sockets clearly state which header square pin size they mate with.
1mm (0.039") Pin Header and Socket
1mm pitch (0.039" centreline) micro headers and sockets are available in through hole, SMD, straight and right angle, single and double row configurations. Available in tape & reel, tube and plastic box packaging. For pick and place equipment, we offer caps and film for tape & reel and tube. GCT high temperature 1mm connectors can withstand the solder process up to 280°C (IR Reflow) or 250°C (Wave Solder), with LCP or Nylon 6T, have an operating temperature of -40°C to + 105°C and have a current rating of 1 amps.