Narrow Your Search
Click to remove.
Remove all selected filters.
Distance between connector pin centrelines. For dual row products pitch defines distance between both pins and rows. Note 0.8 x 1.2mm (0.31” x .047”) is the exception to this rule.
Male headers with exposed pins and female sockets with insulated non-exposed contacts.
Termination method of soldering connector onto PCB.
Defines the orientation which a connector sits on the PCB. Vertical (straight) is 90° to the PCB, right angle (horizontal) is 180° to the PCB. Use the appropriate mating connector pairs for parallel, co-planar and right angle PCB mating configuration.
Number of Rows
Defines PCB connector number of rows. GCT offer single in line (SIL), dual in line (DIL), triple in line (three rows) and quad in line (four rows) options.
Products which achieve a greater space between PCB’s, normally used in parallel PCB stacking applications to achieve a desired height. Elevated headers normally have two insulators, while elevated sockets use an insulator block and modular insulator extenders.
Socket entry type
Searches female connectors only and displays whether header pins may enter from above (top entry), from below with appropriate holes in PCB (bottom entry) or from both above and below (dual entry). See drawings for details of PCB layouts required for bottom entry connector mating.
Plastic locating pegs to hold the connector in place during solder process and may provide extra strength post soldering. Also known as plastic post.
The profile of connectors above the PCB. Vertical connectors denote the stacking profile in parallel PCB applications, right angle connectors denotes height above the PCB.
Polarisation allows connectors to be plugged together in only the correct mating orientation. Achieved by a polarisation cutout or ‘key’ on PCB headers and raised polarisation bump on female connectors. Select both ‘key’ and ‘bump’ to view all polarised parts.
Standard board to board connector range is black, white insulators used for White Lite range for Solid State Lighting (SSL) applications.
Header Square Pin Size
Filters PCB headers only. Displays the size of the header square pin/post, as connector pitch reduces sq. post size reduces too, one reason for lower current carrying capability of smaller pitch PCB connectors. Note: Two options in 1.27mm (.050”) pitch. Female sockets clearly state which header square pin size they mate with.
Board to Board Connectors
Board to board connectors are available in 0.8 x 1.2mm (.031" x .047"), 1mm (.039"), 1.27mm (.050"), 2mm (.079") and 2.54mm (.100") pitch ranges. Board to board have options of surface mount or through hole mount types.
Board to board connectors (receptacles and plugs) have elevated options and can be single, dual, triple or quad rows, straight or right angle orientation.
Board to Board headers and sockets offer customer specifiable pin lengths, varying profile heights, number of contacts from 02 to 100+, with optional locating pegs available.
Technical drawings are offered for all parts.
Board to board connectors are RoHS compliant.