Narrow Your Search
Click to remove.
Remove all selected filters.
GCT offer connectors for the following USB versions:
- USB2.0 is suitable to 480 Mbps, with 4 contacts in Full Size, 5 or 10 contacts in Mini and 5 contacts in Micro.
- USB3.0 is suitable to 5 Gbps, with 9 contacts in Full Size and 10 contacts in Micro.
USB Connector Style
Defines connector body style, from largest, Full Size, down thru Mini and Micro.
- USB2.0 is available in Micro, Mini and Full Size.
- USB3.0 is available in Micro and Full Size only.
Male Plugs mate with Female receptacles. When mated the body of the plug is enveloped by the female USB socket.
For Full Size types, mated connectors are held in place by sprung tangs on the female shell which latch into two cavities on the male shell.
Micro types have the opposite arrangement with tangs on the male shell and cavity on female shells, this is a key reason why USB Micro receptacles are suitable for ten thousand mating cycles.
Full size types are available in both A & B, A is the ‘in-line’ rectangular type, B the square.
Micro receptacles are available in B & A/B. B types accept USB B cable plugs and A/B types accept USB A or B cable plugs. A/B is normally used in On The Go (OTG) applications. Click here
for more information.
Termination method of soldering connector onto PCB. Through hole (TH) or surface mount (SMT).
Position of the connector mating face relative to the PCB. Vertical (straight) is 90° to the PCB, horizontal (right angle) is 180° to the PCB. Upright/flag types have the connector mounted on its side.
Plastic locating pegs to hold the connector in place during solder process and may provide extra strength post soldering. Also known as plastic post.
This defines whether the USB connector has metal shell stakes, and if so what type. Shell stakes are used to hold the connector in place during reflow solder process and provide extra strength post soldering. They also provide grounding.
Mating Face Lead In
Defines whether the connectors mating face includes a lead-in which helps guide mating connectors into place. For applications where customers prefer the connector not to have a lead-in, we offer ‘without mating face’ for flush fitting.
‘With and without mating face lead in’ defines a drawing with an optional lead in.
USB PCB mount connectors in A and B configurations – full size USB2.0 & USB3.0 standards.
Available in through hole and surface mount. With vertical, horizontal and flag PCB mount options. Horizontal parts are mounted on top of the PCB as standard, GCT offer a variety of innovative USB connectors in mid mount configuration. PCB’s are cut to allow the USB receptacle to drop into the space, perfect for low profile applications. GCT offer both mid top and mid bottom mounting options.
Technical drawings, product specifications and 3d models are available for download.