Board to Board Connector

Board to board connector products are available in 0.8x1.2mm (.031"x.047"), 1mm (.039"), 1.27mm (.0 50"), 2mm (.079") and 2.54mm (.100") pitch ranges, with options of surface mount or through hole mount types.

Parts are offered in straight, right angle or U shaped configurations allowing a wide variety of printed circuit board design options.

Receptacles and plugs may be chosen in single, dual, triple or quad rows and both types of product have elevated options to allow stacking design flexibility.

Headers and sockets offer customer specifiable pin lengths, varying profile heights. Choose your number of contacts from two to more than one hundred. Surface mount parts have options for optional locating pegs.

Technical drawings, product specifications and 3D models are available for download or request for all parts.

Board to board connector products are fully RoHS and Reach compliant.

Pitch

Distance between connector pin centrelines. For dual row products pitch defines distance between both pins and rows. Note 0.8 x 1.2mm (0.31” x .047”) is the exception to this rule.

Gender

Male headers with exposed pins and female sockets with insulated non-exposed contacts.

Number Of Rows

Defines PCB connector number of rows. GCT offer single in line (SIL), dual in line (DIL), triple in line (three rows) and quad in line (four rows) options.

Mount Type

Termination method of soldering connector onto PCB.

PCB Orientation

Defines the orientation which a connector sits on the PCB. Vertical (straight) is 90° to the PCB, right angle (horizontal) is 180° to the PCB. Use the appropriate mating connector pairs for parallel, co-planar and right angle PCB mating configuration.

Socket Entry Type

Searches female connectors only and displays whether header pins may enter from above (top entry), from below with appropriate holes in PCB (bottom entry) or from both above and below (dual entry). See drawings for details of PCB layouts required for bottom entry connector mating.

Socket Contact Type

Socket contact type", "Searches female connectors only. Two contact types: ‘Leaf Spring’ and ‘Tuning Fork’, both offer two points of contact with mating header pins. ‘Tuning Fork’ is the lower cost option, with higher insertion and extraction force, suitable only for top entry applications. ‘Leaf Spring’ is lower force contact and suitable for top, bottom & dual entry applications. For higher number of mating cycles choose ‘Leaf Spring’.

Locating Peg

Plastic locating pegs to hold the connector in place during solder process and may provide extra strength post soldering. Also known as plastic post.

Profile

The profile of connectors above the PCB. Vertical connectors denote the stacking profile in parallel PCB applications, right angle connectors denotes height above the PCB.

Header Pin Size

Displays the size of the header square pin/post, as connector pitch reduces sq. post size reduces too, one reason for lower current carrying capability of smaller pitch PCB connectors. Note: Two options in 1.27mm (.050”) pitch. Female sockets clearly state which header square pin size they mate with.

Elevated

Products which achieve a greater space between PCB’s, normally used in parallel PCB stacking applications to achieve a desired height. Elevated headers normally have two insulators, while elevated sockets use an insulator block and modular insulator extenders.

Insulator Colour

Standard board to board connector range is black, white insulators used for White Lite range for Solid State Lighting (SSL) applications.

Board to Board Connectors - Showing 1 - 20 of 22 connectors

Filter

  • Pitch

    Distance between connector pin centrelines. For dual row products pitch defines distance between both pins and rows. Note 0.8 x 1.2mm (0.31” x .047”) is the exception to this rule.

  • Gender

    Male headers with exposed pins and female sockets with insulated non-exposed contacts.

  • Number Of Rows

    Defines PCB connector number of rows. GCT offer single in line (SIL), dual in line (DIL), triple in line (three rows) and quad in line (four rows) options.

  • Mount Type

    Termination method of soldering connector onto PCB.

  • PCB Orientation

    Defines the orientation which a connector sits on the PCB. Vertical (straight) is 90° to the PCB, right angle (horizontal) is 180° to the PCB. Use the appropriate mating connector pairs for parallel, co-planar and right angle PCB mating configuration.

  • Socket Entry Type

    Searches female connectors only and displays whether header pins may enter from above (top entry), from below with appropriate holes in PCB (bottom entry) or from both above and below (dual entry). See drawings for details of PCB layouts required for bottom entry connector mating.

  • Socket Contact Type

    Socket contact type", "Searches female connectors only. Two contact types: ‘Leaf Spring’ and ‘Tuning Fork’, both offer two points of contact with mating header pins. ‘Tuning Fork’ is the lower cost option, with higher insertion and extraction force, suitable only for top entry applications. ‘Leaf Spring’ is lower force contact and suitable for top, bottom & dual entry applications. For higher number of mating cycles choose ‘Leaf Spring’.

  • Locating Peg

    Plastic locating pegs to hold the connector in place during solder process and may provide extra strength post soldering. Also known as plastic post.

  • Profile

    The profile of connectors above the PCB. Vertical connectors denote the stacking profile in parallel PCB applications, right angle connectors denotes height above the PCB.

  • Header Pin Size

    Displays the size of the header square pin/post, as connector pitch reduces sq. post size reduces too, one reason for lower current carrying capability of smaller pitch PCB connectors. Note: Two options in 1.27mm (.050”) pitch. Female sockets clearly state which header square pin size they mate with.

  • Elevated

    Products which achieve a greater space between PCB’s, normally used in parallel PCB stacking applications to achieve a desired height. Elevated headers normally have two insulators, while elevated sockets use an insulator block and modular insulator extenders.

  • Insulator Colour

    Standard board to board connector range is black, white insulators used for White Lite range for Solid State Lighting (SSL) applications.

Filter

Board to Board Connectors - Showing 1 - 20 of 22 connectors

Active
Active

Series: BD076

Pitch1.27mm
GenderSocket
Number of Contacts03-40
PCB Mount typeSurface Mount
Number of RowsSingle
ElevatedNo
OrientationStraight
Square Pin Size0.46mm
Profile2.10mm
Insulator ColourBlack
Entry TypeBottom Entry
Locating PegWith
Active
Active

Series: BG220

Pitch2.54mm
GenderSocket
Number of Contacts04-80
PCB Mount typeThrough Hole
Number of RowsDual
ElevatedNo
OrientationStraight
Square Pin Size0.64mm
Profile7.10mm
Insulator ColourBlack
Entry TypeBottom Entry
Locating PegWithout
Active
Active

Series: BB060

Pitch0.80mm x 1.20mm
GenderSocket
Number of Contacts06-100
PCB Mount typeSurface Mount
Number of RowsDual
ElevatedNo
OrientationStraight
Square Pin Size0.30mm
Profile3.25mm
Insulator ColourBlack
Entry TypeDual Entry
Locating PegWith
Active Distributor Stock Available
Active Distributor Stock Available

Series: BC070

Pitch1.00mm
GenderSocket
Number of Contacts02-40
PCB Mount typeSurface Mount
Number of RowsSingle
ElevatedNo
OrientationStraight
Square Pin Size0.30mm
Profile2.25mm
Insulator ColourBlack
Entry TypeDual Entry
Locating PegWithout
Active Distributor Stock Available
Active Distributor Stock Available

Series: BC084

Pitch1.00mm
GenderSocket
Number of Contacts06-80
PCB Mount typeSurface Mount
Number of RowsDual
ElevatedNo
OrientationStraight
Square Pin Size0.30mm
Profile2.25mm
Insulator ColourBlack
Entry TypeDual Entry
Locating PegWith
Active Distributor Stock Available
Active Distributor Stock Available

Series: BC085

Pitch1.00mm
GenderSocket
Number of Contacts04-80
PCB Mount typeSurface Mount
Number of RowsDual
ElevatedNo
OrientationStraight
Square Pin Size0.30mm
Profile2.25mm
Insulator ColourBlack
Entry TypeDual Entry
Locating PegWithout
Active Distributor Stock Available
Active Distributor Stock Available

Series: BD050

Pitch1.27mm
GenderSocket
Number of Contacts04-80
PCB Mount typeSurface Mount
Number of RowsDual
ElevatedNo
OrientationStraight
Square Pin Size0.40mm
Profile2.15mm
Insulator ColourBlack
Entry TypeDual Entry
Locating PegOptional locating peg
Active Distributor Stock Available
Active Distributor Stock Available

Series: BF121

Pitch2.00mm
GenderSocket
Number of Contacts04-80
PCB Mount typeSurface Mount
Number of RowsDual
ElevatedNo
OrientationStraight
Square Pin Size0.50mm
Profile2.20mm
Insulator ColourBlack
Entry TypeDual Entry
Locating PegOptional locating peg
Active
Active

Series: BF070

Pitch2.00mm
GenderSocket
Number of Contacts02-40
PCB Mount typeThrough Hole
Number of RowsSingle
ElevatedNo
OrientationStraight
Square Pin Size0.50mm
Profile4.30mm
Insulator ColourBlack
Entry TypeDual Entry
Locating PegWithout
Active Distributor Stock Available
Active Distributor Stock Available

Series: BF090

Pitch2.00mm
GenderSocket
Number of Contacts02-40
PCB Mount typeSurface Mount
Number of RowsSingle
ElevatedNo
OrientationStraight
Square Pin Size0.50mm
Profile4.30mm
Insulator ColourBlack
Entry TypeDual Entry
Locating PegWithout
Active
Active

Series: BF065

Pitch2.00mm
GenderSocket
Number of Contacts06-80
PCB Mount typeThrough Hole
Number of RowsDual
ElevatedNo
OrientationStraight
Square Pin Size0.50mm
Profile4.30mm
Insulator ColourBlack
Entry TypeDual Entry
Locating PegWithout
Active Distributor Stock Available
Active Distributor Stock Available

Series: BF080

Pitch2.00mm
GenderSocket
Number of Contacts04-70
PCB Mount typeSurface Mount
Number of RowsDual
ElevatedNo
OrientationStraight
Square Pin Size0.50mm
Profile2.80mm
Insulator ColourBlack
Entry TypeDual Entry
Locating PegOptional locating peg
Active Distributor Stock Available
Active Distributor Stock Available

Series: BF100

Pitch2.00mm
GenderSocket
Number of Contacts04-80
PCB Mount typeSurface Mount
Number of RowsDual
ElevatedNo
OrientationStraight
Square Pin Size0.50mm
Profile4.30mm, 4.60mm
Insulator ColourBlack
Entry TypeDual Entry
Locating PegOptional locating peg
Active
Active

Series: BF120

Pitch2.00mm
GenderSocket
Number of Contacts04-80
PCB Mount typeSurface Mount
Number of RowsDual
ElevatedNo
OrientationStraight
Square Pin Size0.50mm
Profile2.20mm
Insulator ColourBlack
Entry TypeDual Entry
Locating PegOptional locating peg
Active Distributor Stock Available
Active Distributor Stock Available

Series: BG126

Pitch2.54mm
GenderSocket
Number of Contacts02-40
PCB Mount typeThrough Hole
Number of RowsSingle
ElevatedNo
OrientationStraight
Square Pin Size0.64mm
Profile5.00mm
Insulator ColourBlack
Entry TypeDual Entry
Locating PegWithout
Active Distributor Stock Available
Active Distributor Stock Available

Series: BG125

Pitch2.54mm
GenderSocket
Number of Contacts02-40
PCB Mount typeSurface Mount
Number of RowsSingle
ElevatedNo
OrientationStraight
Square Pin Size0.64mm
Profile5.00mm, 7.50mm
Insulator ColourBlack
Entry TypeDual Entry
Locating PegWithout
Active
Active

Series: BG190

Pitch2.54mm
GenderSocket
Number of Contacts04-80
PCB Mount typeThrough Hole
Number of RowsDual
ElevatedNo
OrientationStraight
Square Pin Size0.64mm
Profile5.00mm
Insulator ColourBlack
Entry TypeDual Entry
Locating PegWithout
Active Distributor Stock Available
Active Distributor Stock Available

Series: BG120

Pitch2.54mm
GenderSocket
Number of Contacts04-80
PCB Mount typeSurface Mount
Number of RowsDual
ElevatedNo
OrientationStraight
Square Pin Size0.64mm
Profile5.00mm
Insulator ColourBlack
Entry TypeDual Entry
Locating PegOptional locating peg
Active
Active

Series: BG121

Pitch2.54mm
GenderSocket
Number of Contacts04-80
PCB Mount typeSurface Mount
Number of RowsDual
ElevatedNo
OrientationStraight
Square Pin Size0.64mm
Profile3.65mm
Insulator ColourBlack
Entry TypeDual Entry
Locating PegOptional locating peg
Active
Active

Series: BG180

Pitch2.54mm
GenderSocket
Number of Contacts04-80
PCB Mount typeSurface Mount
Number of RowsDual
ElevatedNo
OrientationStraight
Square Pin Size0.64mm
Profile7.50mm
Insulator ColourBlack
Entry TypeDual Entry
Locating PegOptional locating peg

Be in the know about product launches, promotions and more

By submitting your email, you are agreeing to receive occasional updates from GCT.

Global headquarters

GCT Limited

GCT Inc

GCT Hong Kong Ltd

Regional offices

GCT Logo

Copyright © 2024 GCT (Global Connector Technology) All Rights Reserved

Return to GCT homepage