BF135 - 2.00mm pitch Header Board to Board Connector

Product Resources

• 3D Model Generator
• Electrical Models / PCB Footprints
• Product Drawing
• Specification Overview
• Product Spec

• You can find all available models for the selected series below.

  06 contacts

  BF135-06-X-0400-0700-0400-X-X

  Download PCB Model

  18 contacts

  BF135-18-X-0400-0700-0400-X-X

  Download PCB Model

  48 contacts

  BF135-48-X-0400-0700-0400-X-X

  Download PCB Model

  External Site Disclaimer

  By clicking continue, you understand that you will be redirected to our partners website (www.snapeda.com) to view the PCB layout files available in different formats.

  Cancel Continue

• Material

  Contact Material: Copper alloy
  Standard Insulator Material: Polyamide Nylon 6T, UL94 V-0
  Optional insulator material: Polyester LCP, UL94 V-0
  

  Plating

  (A) Finish: Gold Flash All Over - Under Plate: Nickel 30-50µ”
  (B) Finish: Selective gold flash contact area/tin on tail - Under Plate: Nickel 50-100µ”
  (C) Finish: Tin All Over – 80µ” minimum – Under Plate: Nickel 30-50µ”
  (G&I) Finish: Gold 10µ” (G) or 30µ” (I) on contact area. Tin 100µ” minimum on tail - Under Plate: Nickel 50-100µ”
  

  Electrical

  Current Rating: 2 AMP
  Contact Resistance: 20mΩ Max.
  Insulation resistance: 1000 MΩ MIN.
  Dielectric withstanding voltage: AC 500 V
  

  Environmental and Processing

  Operating Temperature: -40°C to +105°C - (Contact GCT if you require temperatures outside this range)
  LCP Suitable For: IR Reflow, Wave, Manual solder
  Nylon 6T Suitable For: IR Reflow, Wave, Manual solder