Filter

• Family
  

  The family which the part belongs to: Board to Board or Wire Trap

  • Board to Board Connector (2)
• Pitch
  

  Distance between connector pin centrelines. For dual row products pitch defines distance between both pins and rows. Note 0.8 x 1.2mm (0.31” x .047”) is the exception to this rule.

  • 2.54mm (2)
  • 4.00mm
• Gender
  

  Male headers with exposed pins and female sockets with insulated non-exposed contacts.

  • Header (2)
  • Socket
• Mount Type
  

  Termination method of soldering connector onto PCB.

  • Surface mount
  • Through hole (2)
• PCB Orientation
  

  Defines the orientation which a connector sits on the PCB. Vertical (straight) is 90° to the PCB, right angle (horizontal) is 180° to the PCB. Use the appropriate mating connector pairs for parallel, co-planar and right angle PCB mating configuration.

  • Right angle (4)
  • Straight (1)
  • U-Shaped (2)
• Profile
  

  The profile of connectors above the PCB. Vertical connectors denote the stacking profile in parallel PCB applications, right angle connectors denotes height above the PCB.

  • 1.00mm to 1.99mm
  • 2.00mm to 2.99mm (2)
  • 3.00mm to 3.99mm
  • 4.00mm to 4.99mm
  • Over 5.00mm
• Insulator Colour
  

  Standard board to board connector range is black, white insulators used for White Lite range for Solid State Lighting (SSL) applications.

  • Natural (2)

Convert to inches

Remove all selected filters