SIM card connector

GCT range of SIM card connector products are available to suit Mini (2FF), Micro (3FF) and Nano (4FF) SIM card types.

Connectors are available in the following styles: Push-push, hinged & push-pull. Furthermore a dual push-pull type allows two cards to be plugged into one connector.

All connectors are surface mount, six or eight pin versions are available depending on series, the six position version is by far the most popular in the market.

Other SIM connector range features:

  • SIM card detection switches are available, allows electronic detection when the SIM Card is inserted or removed.
  • Profile height options range between 1.35mm to 3.44mm above the printed circuit board.
  • Durability, which measures number of card insertion cycles varies between connector types, please check drawings for options. Typcially connectors are rated between 1,500 and 10,000 card insertion cycles.
  • Plastic locating peg are an optional choice on some parts of the range.

Product specifications, technical drawings and 3D models are available for instant download on all parts.

The SIM card connector range is RoHS and Reach compliant.


Remove all selected filters
  • SIM Card Size
    Defines the SIM card type accepted by the connector. SIM Connectors are available in the following form factors (FF):
    • SIM (aka Mini SIM) (2FF)
    • Micro SIM (3FF)
    • Nano SIM (4FF)
    Depending on form factor SIM cards vary in size and thickness, although the contact position layout remains uniform across the card types.
  • Card Insertion Type
    SIM connectors are available in the following card insertion types:
    • Push-Push -the SIM card is pushed into place and pushed again to release, ejecting by spring action. Push-Push is often used in consumer applications where users insert and eject SIM cards into a device.
    • Push-Pull -the SIM card is pushed into place and held in place by force of contacts and pulled to remove. Push-Pull is the lowest cost type of SIM connector.
    • Hinged - the connector opens to allow insertion of SIM card, hinged types are useful where a positive lock is required, especially in high vibration environments.
      SIM5060 & 5055 hold the card in place in the hinged cover, for ease of use. To achieve an ultra-low profile, the SIM5051 does not hold the card in place.
    • Dual - Allows two SIM cards to be plugged into one connector. This is a Push-Pull connector type.
  • Number of Contacts
    Defines number of contacts connecting with SIM card pads.
    6 contact versions are most popular as used in the majority of GSM or CDMA applications.

    SIM contacts no. 4 and 8 are not generally used and defined by the ETSI spec as ‘reserved for future use’. Although 8 contact versions are used in MegaSIM applications.

    SIM Card detection switch contacts are covered in a separate search.
    • 61
    • 8
    • 8x2 (dual SIM)
  • Card Detection Switch
    Connectors with a SIM card detection switch enable the designer to electronically signal when SIM cards are inserted or removed. Switches are normally open, the circuit is closed when the card is inserted.

    Note – Card detection switches are some sometimes referred to as extra contacts. For example: 6+2 (6 x SIM contacts + 2 x switch contacts).
    GCT do not classify card detection contacts as +2, but as ‘with’ or without’ card detection switch.
    • With - Normally Open
    • With - Normally Closed
    • Without1
  • Profile
    The height profile of SIM connectors above the PCB. For hinged connectors, profile denotes the connector in closed position.
  • Locating Peg
    Plastic locating pegs used to hold the connector in place during solder process and may provide extra strength post soldering. Also known as plastic post.
  • Polarised?
    Polarisation allows the SIM card to only be inserted in the correct orientation.

SIM Card Connectors - 1 connectors

Distributor Stock Available
SIM7200 - Hinged SIM Card Connector

Series: SIM7200

Tested for shock & vibration to EIA-364-27
Product Status: Active
3FF Micro SIM connector
Connector styleHinged
Number of contacts6
Card detection switchWithout switch
Locating peg optionWithout locating peg
Card Insertion: Card placed direct onto contacts, lid closes then is locked into place

Contacts & Connections

By submitting your email, you are agreeing to receive occasional updates from GCT.
Social Media
Copyright © 2024 GCT (Global Connector Technology)
All Rights Reserved