USB3.0 Connectors

All USB3.0 connectors are available in multiple interfaces: A type, B type and AB type.

Full size connectors have 9 contacts, Micro connectors 10 contacts.

Right angle connectors are available thru hole, SMT, top, mid-top, mid-bottom, bottom mount and with or without locating pegs. Vertical connectors are available thru hole in A type.

Reverse mount connectors available in bottom mount or mid mount (mounting from below), these types are also known as bottom mount or sink type.

Dual stacked A type connector is available thru hole in tape and reel packaging.

Find Product specifications, technical drawings and 3d models for USB3.0 connectors available for instant download and viewing.
USB Connector Style

Defines connector body style, from largest, Full Size, down thru Mini and Micro.

  • USB2.0 is available in Micro, Mini and Full Size.
  • USB3.0 is available in Micro and Full Size only.

USB Version

GCT offer connectors for the following USB versions:

  • USB2.0 is suitable to 480 Mbps, with 4 contacts in Full Size, 5 or 10 contacts in Mini and 5 contacts in Micro.
  • USB3.0 (also known as USB3.1 Gen 1 or USB Superspeed) is suitable to 5 Gbps, with 9 contacts in Full Size and 10 contacts in Micro.
  • USB3.1 (also known as USB3.1 Gen 2 or USB Superspeed+) is suitable to 10 Gbps, with 9 contacts in Full Size, 10 contacts in Micro and 24 contacts in type C.

Interface

Full size types are available in both A & B, A is the ‘in-line’ rectangular type, B the square.

Micro receptacles are available in B & A/B. B types accept USB B cable plugs and A/B types accept USB A or B cable plugs. A/B is normally used in On The Go (OTG) applications. Click here for more information.

Waterproof

The Ingress Protection (IP) rating indicates the effectiveness from foreign bodies (i.e. dust) and water moisture. The first digit indicates the protection from foreign bodies and the second the sealing from water moisture, the higher the number the better the protection:

IP6X - Dust Tight - no particle ingress
IPX7 - Waterproof for 30 minutes, up to 1 meter underwater IP67 - Dust Tight - no particle ingress AND Waterproof for 30 minutes, up to 1 meter underwater

Gender

Male Plugs mate with Female receptacles. When mated the body of the plug is enveloped by the female USB socket.

For Full Size types, mated connectors are held in place by sprung tangs on the female shell which latch into two cavities on the male shell.

Micro types have the opposite arrangement with tangs on the male shell and cavity on female shells, this is a key reason why USB Micro receptacles are suitable for ten thousand mating cycles.

Number of Contacts

USB2.0 Full Size are 4 contact. USB2.0 Mini* & Micro 5 contact. USB3.0 Full size 9 contacts. USB3.0 micro 10 contacts.

2x4 and 2x9 options define dual receptacles (stacked connector).

*GCT offer a special Mini with 10 contacts.

PCB Orientation

Position of the connector mating face relative to the PCB. Vertical (straight) is 90° to the PCB, horizontal (right angle) is 180° to the PCB. Upright/flag types have the connector mounted on its side.

PCB Mount Position

Horizontal connectors only

Bottom and top mount defines which side of the PCB the connector is placed. Note – Standard PCB mounting - Micro types mounted on the underside (bottom), mini and full size types on top. GCT also offer non-standard ‘reverse’ mount types. The USB symbol on mating cables is designed to always face upwards, regardless of PCB mount position. Click here for more information.

Mid mount types can be either bottom or top PCB mount and are placed within a cut-out on the PCB, these would normally be used in low profile applications where height above PCB is critical.

Contact Pin Type

Termination method of soldering connector onto PCB. Through hole (TH), surface mount (SMT) or Hybrid.

The horizontal hybrid types allow better control over co-planarity of SMT contacts and alignment of thru hole pins. From an inspection point of view the hybrid allows customers to inspect the connectors post processing, as viewing the inner rows of contacts on pure SMT parts is difficult. The hybrid type may be processed using paste in hole, which allows a single process.

Shell Stake Type

This defines whether the USB connector has metal shell stakes, and if so what type. Shell stakes are used to hold the connector in place during reflow solder process and provide extra strength post soldering. They also provide grounding.

Locating Peg

Plastic locating pegs to hold the connector in place during solder process and may provide extra strength post soldering. Also known as plastic post.

Mating Cycles

The number of repeated connection/disconnections the connector can withstand whilst still meeting the specifications for contact resistance and mating forces.

Mating Face Lead In

Defines whether the connectors mating face includes a lead-in which helps guide mating connectors into place. For applications where customers prefer the connector not to have a lead-in, we offer ‘without mating face’ for flush fitting.

‘With and without mating face lead in’ defines a drawing with an optional lead in.

Current Rating

The maximum current in amperes at the rated voltage that the connector will carry continuously under defined conditions without exceeding specified performance limits.

USB receptacles and plugs - Showing 1 - 20 of 22 connectors

Filter

  • USB Connector Style

    Defines connector body style, from largest, Full Size, down thru Mini and Micro.

    • USB2.0 is available in Micro, Mini and Full Size.
    • USB3.0 is available in Micro and Full Size only.

  • USB Version

    GCT offer connectors for the following USB versions:

    • USB2.0 is suitable to 480 Mbps, with 4 contacts in Full Size, 5 or 10 contacts in Mini and 5 contacts in Micro.
    • USB3.0 (also known as USB3.1 Gen 1 or USB Superspeed) is suitable to 5 Gbps, with 9 contacts in Full Size and 10 contacts in Micro.
    • USB3.1 (also known as USB3.1 Gen 2 or USB Superspeed+) is suitable to 10 Gbps, with 9 contacts in Full Size, 10 contacts in Micro and 24 contacts in type C.

  • Interface

    Full size types are available in both A & B, A is the ‘in-line’ rectangular type, B the square.

    Micro receptacles are available in B & A/B. B types accept USB B cable plugs and A/B types accept USB A or B cable plugs. A/B is normally used in On The Go (OTG) applications. Click here for more information.

  • Waterproof

    The Ingress Protection (IP) rating indicates the effectiveness from foreign bodies (i.e. dust) and water moisture. The first digit indicates the protection from foreign bodies and the second the sealing from water moisture, the higher the number the better the protection:

    IP6X - Dust Tight - no particle ingress
    IPX7 - Waterproof for 30 minutes, up to 1 meter underwater IP67 - Dust Tight - no particle ingress AND Waterproof for 30 minutes, up to 1 meter underwater

  • Gender

    Male Plugs mate with Female receptacles. When mated the body of the plug is enveloped by the female USB socket.

    For Full Size types, mated connectors are held in place by sprung tangs on the female shell which latch into two cavities on the male shell.

    Micro types have the opposite arrangement with tangs on the male shell and cavity on female shells, this is a key reason why USB Micro receptacles are suitable for ten thousand mating cycles.

  • Number of Contacts

    USB2.0 Full Size are 4 contact. USB2.0 Mini* & Micro 5 contact. USB3.0 Full size 9 contacts. USB3.0 micro 10 contacts.

    2x4 and 2x9 options define dual receptacles (stacked connector).

    *GCT offer a special Mini with 10 contacts.

  • PCB Orientation

    Position of the connector mating face relative to the PCB. Vertical (straight) is 90° to the PCB, horizontal (right angle) is 180° to the PCB. Upright/flag types have the connector mounted on its side.

  • PCB Mount Position

    Horizontal connectors only

    Bottom and top mount defines which side of the PCB the connector is placed. Note – Standard PCB mounting - Micro types mounted on the underside (bottom), mini and full size types on top. GCT also offer non-standard ‘reverse’ mount types. The USB symbol on mating cables is designed to always face upwards, regardless of PCB mount position. Click here for more information.

    Mid mount types can be either bottom or top PCB mount and are placed within a cut-out on the PCB, these would normally be used in low profile applications where height above PCB is critical.

  • Contact Pin Type

    Termination method of soldering connector onto PCB. Through hole (TH), surface mount (SMT) or Hybrid.

    The horizontal hybrid types allow better control over co-planarity of SMT contacts and alignment of thru hole pins. From an inspection point of view the hybrid allows customers to inspect the connectors post processing, as viewing the inner rows of contacts on pure SMT parts is difficult. The hybrid type may be processed using paste in hole, which allows a single process.

  • Shell Stake Type

    This defines whether the USB connector has metal shell stakes, and if so what type. Shell stakes are used to hold the connector in place during reflow solder process and provide extra strength post soldering. They also provide grounding.

  • Locating Peg

    Plastic locating pegs to hold the connector in place during solder process and may provide extra strength post soldering. Also known as plastic post.

  • Mating Cycles

    The number of repeated connection/disconnections the connector can withstand whilst still meeting the specifications for contact resistance and mating forces.

  • Mating Face Lead In

    Defines whether the connectors mating face includes a lead-in which helps guide mating connectors into place. For applications where customers prefer the connector not to have a lead-in, we offer ‘without mating face’ for flush fitting.

    ‘With and without mating face lead in’ defines a drawing with an optional lead in.

  • Current Rating

    The maximum current in amperes at the rated voltage that the connector will carry continuously under defined conditions without exceeding specified performance limits.

Filter

USB receptacles and plugs - Showing 1 - 20 of 22 connectors

Active Distributor Stock Available
Active Distributor Stock Available

USB3070

Connector styleMicro
InterfaceB
USB version2.0
GenderReceptacle (socket)
Number of contacts5
PCB mount typeSurface Mount
OrientationHorizontal
Entry typeSide
Profile2.35mm
Offset height1.00mm
Mount positionMid Bottom Mount
Current Rating1.8A
Mating face styleWith
Shell stakeSurface Mount
Locating PegWithout
Mating Cycles10000
Active Distributor Stock Available
Active Distributor Stock Available

USB3075

Connector styleMicro
InterfaceB
USB version2.0
GenderReceptacle (socket)
Number of contacts5
PCB mount typeSurface Mount
OrientationHorizontal
Entry typeSide
Profile2.35mm
Mount positionBottom Mount
Current Rating1.8A
Mating face styleWith
Shell stakeThrough Hole
Locating PegWithout
Mating Cycles10000
Active Distributor Stock Available
Active Distributor Stock Available

USB3076

Connector styleMicro
InterfaceB
USB version2.0
GenderReceptacle (socket)
Number of contacts5
PCB mount typeSurface Mount
OrientationHorizontal
Entry typeSide
Profile2.35mm
Mount positionBottom Mount
Current Rating1.8A
Mating face styleWithout
Shell stakeThrough Hole
Locating PegWithout
Mating Cycles10000
Active Distributor Stock Available
Active Distributor Stock Available

USB3080

Connector styleMicro
InterfaceB
USB version2.0
GenderReceptacle (socket)
Number of contacts5
PCB mount typeSurface Mount
OrientationHorizontal
Entry typeSide
Profile2.35mm
Mount positionBottom Mount
Current Rating1.8A
Mating face styleWith
Shell stakeThrough Hole
Locating PegOptional locating peg
Mating Cycles10000
Active Distributor Stock Available
Active Distributor Stock Available

USB3085

Connector styleMicro
InterfaceA/B
USB version2.0
GenderReceptacle (socket)
Number of contacts5
PCB mount typeSurface Mount
OrientationHorizontal
Entry typeSide
Profile2.40mm
Mount positionBottom Mount
Current Rating1.8A
Mating face styleWith
Shell stakeSurface Mount
Locating PegWithout
Mating Cycles10000
Active Distributor Stock Available
Active Distributor Stock Available

USB3090

Connector styleMicro
InterfaceA/B
USB version2.0
GenderReceptacle (socket)
Number of contacts5
PCB mount typeSurface Mount
OrientationHorizontal
Entry typeSide
Profile2.40mm
Mount positionBottom Mount
Current Rating1.8A
Mating face styleWith
Shell stakeThrough Hole
Locating PegWithout
Mating Cycles10000
Active Distributor Stock Available
Active Distributor Stock Available

USB3100

Connector styleMicro
InterfaceB
USB version2.0
GenderReceptacle (socket)
Number of contacts5
PCB mount typeSurface Mount
OrientationHorizontal
Entry typeSide
Profile2.47mm
Mount positionTop Mount
Current Rating1.8A
Mating face styleWith
Shell stakeSurface Mount
Locating PegWithout
Mating Cycles10000
Additional InformationAlso known as Micro USB reverse type
Active Distributor Stock Available
Active Distributor Stock Available

USB3105

Connector styleMicro
InterfaceA/B
USB version2.0
GenderReceptacle (socket)
Number of contacts5
PCB mount typeThrough Hole
OrientationVertical
Entry typeTop
Profile5.60mm
Mount positionTop Mount
Current Rating1.8A
Mating face styleWith
Shell stakeThrough Hole
Shell stake lengths1.50mm (for 1.00mm PCB)
Locating PegWithout
Mating Cycles10000
Active Distributor Stock Available
Active Distributor Stock Available

USB3106

Connector styleMicro
InterfaceA/B
USB version2.0
GenderReceptacle (socket)
Number of contacts5
PCB mount typeThrough Hole
OrientationVertical
Entry typeTop
Profile5.60mm
Mount positionTop Mount
Current Rating1.8A
Mating face styleWith
Shell stakeThrough Hole
Shell stake lengths2.30mm (for 1.60mm PCB)
Locating PegWithout
Mating Cycles10000
Active Distributor Stock Available
Active Distributor Stock Available

USB3130

Connector styleMicro
InterfaceB
USB version2.0
GenderReceptacle (socket)
Number of contacts5
PCB mount typeThrough Hole
OrientationVertical
Entry typeTop
Profile5.60mm
Mount positionTop Mount
Current Rating1.8A
Mating face styleWith
Shell stakeThrough Hole
Shell stake lengths1.50mm (for 1.00mm PCB)
Locating PegWithout
Mating Cycles10000
Active Distributor Stock Available
Active Distributor Stock Available

USB3131

Connector styleMicro
InterfaceB
USB version2.0
GenderReceptacle (socket)
Number of contacts5
PCB mount typeThrough Hole
OrientationVertical
Entry typeTop
Profile5.60mm
Mount positionTop Mount
Current Rating1.8A
Mating face styleWith
Shell stakeThrough Hole
Shell stake lengths2.30mm (for 1.60mm PCB)
Locating PegWithout
Mating Cycles10000
Active Distributor Stock Available
Active Distributor Stock Available

USB3135

Connector styleMicro
InterfaceB
USB version2.0
GenderReceptacle (socket)
Number of contacts5
PCB mount typeSurface Mount
OrientationHorizontal
Entry typeSide
Profile2.47mm
Mount positionTop Mount
Current Rating1.8A
Mating face styleWith
Shell stakeThrough Hole
Locating PegWithout
Mating Cycles10000
Additional InformationAlso known as Micro USB reverse type
Active Distributor Stock Available
Active Distributor Stock Available

USB3140Alternative Product: USB3160

Connector styleMicro
InterfaceB
USB version2.0
GenderReceptacle (socket)
Number of contacts5
PCB mount typeSurface Mount
OrientationVertical
Entry typeTop
Profile6.50mm
Mount positionTop Mount
Current Rating1.8A
Mating face styleWith or without
Shell stakeThrough Hole
Shell stake lengths0.70mm, 1.40mm, 1.70mm (for 1.00mm PCB), 2.30mm (for 1.60mm PCB)
Locating PegWithout
Mating Cycles10000
Active Distributor Stock Available
Active Distributor Stock Available

USB3145

Connector styleMicro
InterfaceB
USB version2.0
GenderReceptacle (socket)
Number of contacts5
PCB mount typeThrough Hole
OrientationVertical
Entry typeTop
Profile6.50mm
Mount positionTop Mount
Current Rating1.8A
Mating face styleWith or without
Shell stakeThrough Hole
Shell stake lengths2.30mm (for 1.60mm PCB)
Locating PegWithout
Mating Cycles10000
Active Distributor Stock Available
Active Distributor Stock Available

USB3150

Connector styleMicro
InterfaceB
USB version2.0
GenderPlug
Number of contacts5
PCB mount typeThrough Hole
OrientationVertical
Entry typeTop
Profile7.13mm
Mount positionTop Mount
Current Rating1.8A
Mating face styleWithout
Shell stakeThrough Hole
Shell stake lengths0.75mm (for 0.40mm PCB), 1.30mm (for 0.80mm PCB)
Locating PegWith
Mating Cycles10000
Active Distributor Stock Available
Active Distributor Stock Available

USB3155

Connector styleMicro
InterfaceB
USB version2.0
GenderReceptacle (socket)
Number of contacts5
PCB mount typeSurface Mount
OrientationHorizontal
Entry typeSide
Profile2.49mm
Offset height2.51mm
Mount positionMid Bottom Mount
Current Rating1.8A
Mating face styleWith
Shell stakeThrough Hole
Locating PegWithout
Mating Cycles10000
Active Distributor Stock Available
Active Distributor Stock Available

USB3160

Connector styleMicro
InterfaceB
USB version2.0
GenderReceptacle (socket)
Number of contacts5
PCB mount typeSurface Mount
OrientationVertical
Entry typeTop
Profile5.30mm without lead in, 6.09mm with lead in
Mount positionTop Mount
Current Rating2.8A
Mating face styleWith or without
Shell stakeThrough Hole
Shell stake lengths0.60mm, 1.10mm (for 0.80mm PCB), 1.60mm (for 1.00mm PCB)
Locating PegWith
Mating Cycles10000
Active Distributor Stock Available
Active Distributor Stock Available

USB3180

Connector styleMicro
InterfaceB
USB version2.0
GenderReceptacle (socket)
Number of contacts5
PCB mount typeSurface Mount
OrientationVertical
Entry typeTop
Profile6.50mm
Current Rating1.8A
Mating face styleWith
Shell stakeThrough Hole
Shell stake lengths1.70mm (for 1.00mm PCB)
Locating PegWith
Mating Cycles10000
Active Distributor Stock Available
Active Distributor Stock Available

USB3190

Connector styleMicro
InterfaceB
USB version2.0
GenderReceptacle (socket)
Number of contacts5
PCB mount typeSurface Mount
OrientationVertical
Entry typeTop
Profile3.95mm
Mount positionMid Mount
Current Rating1.8A
Mating face styleWithout
Shell stakeThrough Hole
Locating PegWithout
Mating Cycles10000
Body Length4.70mm
Active IP Rated Distributor Stock Available
Active IP Rated Distributor Stock Available

USB3500

Connector styleMicro
WaterproofIP67
InterfaceB
USB version2.0
GenderReceptacle (socket)
Number of contacts5
PCB mount typeSurface Mount
OrientationHorizontal
Entry typeSide
Profile2.45mm
Mount positionMid Mount
Current Rating1.8A
Mating face styleWithout
Shell stakeThrough Hole
Locating PegWith
Mating Cycles10000
Body Length5.30mm
Additional InformationFor IP67 performance, USBTJ-02 gasket ordered separately.

Be in the know about product launches, promotions and more

By submitting your email, you are agreeing to receive occasional updates from GCT.

Global headquarters

GCT Limited

GCT Inc

GCT Hong Kong Ltd

Regional offices

GCT Logo

Copyright © 2024 GCT (Global Connector Technology) All Rights Reserved

Return to GCT homepage