Narrow Your Search
USB Version: 3.0
To remove, click
Remove all selected filters.
- USB2.0 is suitable to 480 Mbps, with 4 contacts in Full Size, 5 or 10 contacts in Mini and 5 contacts in Micro.
- USB3.0 is suitable to 5 Gbps, with 9 contacts in Full Size and 10 contacts in Micro.
- USB2.0 is available in Micro, Mini and Full Size.
- USB3.0 is available in Micro and Full Size only.
For Full Size types, mated connectors are held in place by sprung tangs on the female shell which latch into two cavities on the male shell.
Micro types have the opposite arrangement with tangs on the male shell and cavity on female shells, this is a key reason why USB Micro receptacles are suitable for ten thousand mating cycles.
Micro receptacles are available in B & A/B. B types accept USB B cable plugs and A/B types accept USB A or B cable plugs. A/B is normally used in On The Go (OTG) applications. Click here for more information.
Bottom and top mount defines which side of the PCB the connector is placed. Note – Standard PCB mounting - Micro types mounted on the underside (bottom), mini and full size types on top. GCT also offer non-standard ‘reverse’ mount types. The USB symbol on mating cables is designed to always face upwards, regardless of PCB mount position. Click here for more information.
Mid mount types can be either bottom or top PCB mount and are placed within a cut-out on the PCB, these would normally be used in low profile applications where height above PCB is critical.
2x4 and 2x9 options define dual receptacles (stacked connector).
*GCT offer a special Mini with 10 contacts.
‘With and without mating face lead in’ defines a drawing with an optional lead in.
All USB3.0 connectors are available in multiple interfaces: A type, B type and AB type.
Full size connectors have 9 contacts, Micro connectors 10 contacts.
Right angle connectors are available thru hole, SMT, top, mid-top, mid-bottom, bottom mount and with or without locating pegs. Vertical connectors are available thru hole in A type.
Reverse mount connectors available in bottom mount or mid mount (mounting from below), these types are also known as bottom mount or sink type.
Dual stacked A type connector is available thru hole in tape and reel packaging.
Find Product specifications, technical drawings and 3d models for USB3.0 connectors available for instant download and viewing.