Board to Board Mating Connectors for BD064

Number Of Rows

Defines PCB connector number of rows. GCT offer single in line (SIL), dual in line (DIL), triple in line (three rows) and quad in line (four rows) options.

Mount Type

Termination method of soldering connector onto PCB.

PCB Orientation

Defines the orientation which a connector sits on the PCB. Vertical (straight) is 90° to the PCB, right angle (horizontal) is 180° to the PCB. Use the appropriate mating connector pairs for parallel, co-planar and right angle PCB mating configuration.

Locating Peg

Plastic locating pegs to hold the connector in place during solder process and may provide extra strength post soldering. Also known as plastic post.

Profile

The profile of connectors above the PCB. Vertical connectors denote the stacking profile in parallel PCB applications, right angle connectors denotes height above the PCB.

Elevated

Products which achieve a greater space between PCB’s, normally used in parallel PCB stacking applications to achieve a desired height. Elevated headers normally have two insulators, while elevated sockets use an insulator block and modular insulator extenders.

Board to Board Mating Connectors - 6 connectors

Filter

  • Number Of Rows

    Defines PCB connector number of rows. GCT offer single in line (SIL), dual in line (DIL), triple in line (three rows) and quad in line (four rows) options.

  • Mount Type

    Termination method of soldering connector onto PCB.

  • PCB Orientation

    Defines the orientation which a connector sits on the PCB. Vertical (straight) is 90° to the PCB, right angle (horizontal) is 180° to the PCB. Use the appropriate mating connector pairs for parallel, co-planar and right angle PCB mating configuration.

  • Locating Peg

    Plastic locating pegs to hold the connector in place during solder process and may provide extra strength post soldering. Also known as plastic post.

  • Profile

    The profile of connectors above the PCB. Vertical connectors denote the stacking profile in parallel PCB applications, right angle connectors denotes height above the PCB.

  • Elevated

    Products which achieve a greater space between PCB’s, normally used in parallel PCB stacking applications to achieve a desired height. Elevated headers normally have two insulators, while elevated sockets use an insulator block and modular insulator extenders.

Filter

Board to Board Mating Connectors - 6 connectors

Mating Socket
Active
BD064 - 1.27mm pitch Socket Board to Board Connector
Active

Series: BD064

Pitch1.27mm
GenderSocket
Number of Contacts04-100
PCB Mount typeSurface Mount
Number of RowsDual
ElevatedNo
OrientationStraight
Square Pin Size0.40mm
Profile4.60mm
Insulator ColourBlack
Entry TypeTop Entry
Locating PegOptional locating peg
Active
BD025 - 1.27mm pitch Header Board to Board Connector
Active

Series: BD025

Pitch1.27mm
GenderHeader
Number of Contacts04-66
PCB Mount typeThrough Hole
Number of RowsDual
ElevatedYes
OrientationStraight
Square Pin Size0.40mm
ProfileCustomer specifiable
Insulator ColourBlack
Locating PegWithout
Active Distr Stock Available
BD030 - 1.27mm pitch Header Board to Board Connector
Active Distr Stock Available

Series: BD030

Pitch1.27mm
GenderHeader
Number of Contacts04-66
PCB Mount typeThrough Hole
Number of RowsDual
ElevatedNo
OrientationStraight
Square Pin Size0.40mm
Profile1.00mm, 1.50mm, 1.70mm, 2.00mm, 2.50mm, 3.00mm
Insulator ColourBlack
Locating PegWithout
Active
BD035 - 1.27mm pitch Header Board to Board Connector
Active

Series: BD035

Pitch1.27mm
GenderHeader
Number of Contacts04-66
PCB Mount typeThrough Hole
Number of RowsDual
ElevatedNo
OrientationRight Angle
Square Pin Size0.40mm
Profile3.40mm
Insulator ColourBlack
Locating PegWithout
Active
BD040 - 1.27mm pitch Header Board to Board Connector
Active

Series: BD040

Pitch1.27mm
GenderHeader
Number of Contacts06-66
PCB Mount typeSurface Mount
Number of RowsDual
ElevatedYes
OrientationStraight
Square Pin Size0.40mm
ProfileCustomer specifiable
Insulator ColourBlack
Locating PegWithout
Active Distr Stock Available
BD095 - 1.27mm pitch Header Board to Board Connector
Active Distr Stock Available

Series: BD095

Pitch1.27mm
GenderHeader
Number of Contacts06-66
PCB Mount typeSurface Mount
Number of RowsDual
ElevatedNo
OrientationStraight
Square Pin Size0.40mm
Profile1.00mm, 1.50mm, 2.00mm, 2.50mm, 3.00mm
Insulator ColourBlack
Locating PegOptional locating peg
Active
BD038 - 1.27mm pitch Header Board to Board Connector
Active

Series: BD038

Pitch1.27mm
GenderHeader
Number of Contacts06-66
PCB Mount typeSurface Mount
Number of RowsDual
ElevatedNo
OrientationRight Angle
Square Pin Size0.40mm
Profile3.40mm
Insulator ColourBlack
Locating PegWith

Be in the know about product launches, promotions and more

By submitting your email, you are agreeing to receive occasional updates from GCT.

Global headquarters

GCT Limited

GCT Inc

GCT Hong Kong Ltd

Regional offices

GCT Logo

Copyright © 2024 GCT (Global Connector Technology) All Rights Reserved

Return to GCT homepage